Display Stand for Original Xbox S and Duke Controllers OG OGX / Custom 3D Printed / Multicolors
Custom 3D Printed - Display Stand for Original Xbox S and Duke Controllers.
Display stands are compatible with the (OG) Original Xbox Controllers S and Duke. Aftermarket brands may not fit properly.
-Simple and stylish design.
-OG Xbox style logo on the front.
-Cable management on the back with holes for the cable's plug. I recommend removing the breakaway cable before storage and using the small plug end for storage instead,
for a cleaner and more compact look. The breakaway cable is just bulky, but there's a slot for it if needed.
-This stand was designed primarily around the S controllers with some adjustments to accommodate the Duke controller.
Due to the round shape of the Duke controller, it may slide side to side as you're wrapping the cable. Recenter the Duke controller after wrapping the cable.
-The Ferrite/Suppressor coming at the top of the cord, near the controller, can get in the way sometimes when wrapping the cable.
I've found it works best by placing the ferrite between the legs, rather than the outside.
-Currently stands are available in black with your choice of inlay color. Please see photo 10 for color options.
Custom 3D Printed - Display Stand for Original Xbox S and Duke Controllers.
Display stands are compatible with the (OG) Original Xbox Controllers S and Duke. Aftermarket brands may not fit properly.
-Simple and stylish design.
-OG Xbox style logo on the front.
-Cable management on the back with holes for the cable's plug. I recommend removing the breakaway cable before storage and using the small plug end for storage instead,
for a cleaner and more compact look. The breakaway cable is just bulky, but there's a slot for it if needed.
-This stand was designed primarily around the S controllers with some adjustments to accommodate the Duke controller.
Due to the round shape of the Duke controller, it may slide side to side as you're wrapping the cable. Recenter the Duke controller after wrapping the cable.
-The Ferrite/Suppressor coming at the top of the cord, near the controller, can get in the way sometimes when wrapping the cable.
I've found it works best by placing the ferrite between the legs, rather than the outside.
-Currently stands are available in black with your choice of inlay color. Please see photo 10 for color options.
Custom 3D Printed - Display Stand for Original Xbox S and Duke Controllers.
Display stands are compatible with the (OG) Original Xbox Controllers S and Duke. Aftermarket brands may not fit properly.
-Simple and stylish design.
-OG Xbox style logo on the front.
-Cable management on the back with holes for the cable's plug. I recommend removing the breakaway cable before storage and using the small plug end for storage instead,
for a cleaner and more compact look. The breakaway cable is just bulky, but there's a slot for it if needed.
-This stand was designed primarily around the S controllers with some adjustments to accommodate the Duke controller.
Due to the round shape of the Duke controller, it may slide side to side as you're wrapping the cable. Recenter the Duke controller after wrapping the cable.
-The Ferrite/Suppressor coming at the top of the cord, near the controller, can get in the way sometimes when wrapping the cable.
I've found it works best by placing the ferrite between the legs, rather than the outside.
-Currently stands are available in black with your choice of inlay color. Please see photo 10 for color options.
CHECK OUT THE VIDEO
